Telephone: (607) 589-6160 Fax: (607) 589-4026 Email: info@northeastimplement.com
|
Telephone: (607) 589-6160 Fax: (607) 589-4026 Email: info@northeastimplement.com |
|
Northeast Implement Corporate Home Page VALBY Log, Sorting and Demolition Grapples VALBY Log Grapple for Skidsteer Electric Motor or Engine Driven Wood Chippers
|
VALBY LC600 Woodchipper The VALBY LC600 chipper produces uniform chips which can be used for burning, animal bedding, landscaping and mulch. The chipper can chip soft and hard woods, green or seasoned. The chipper is capable of chipping 6 1/4" diameter round wood. It can handle residue from logging, land clearing, orchards and gardens. The chipper can also handle slabs up to 9" wide. The material is drawn into the chipper at the speed of 1 to 3 feet per second. The chipper is self-feeding and draws in the material without pushing by the operator.
Ease of Operation The low feeding point ensures effortless feeding of the chipper. The operator can stand with a straight back. The chipper stands by itself on the ground and is easy to hook up or remove from the tractor. The large feed chute takes most unpruned branches, eliminating time-consuming pruning. Durable Design The VALBY LC600 is the machine for people who have use for a small durable chipper. You know this machine was built to last because of the hefty 725 lb. weight. The heavy cutter disk carries a lot of inertia, which helps the chipper run smoother, is easier on the tractor, and enables bigger pieces to be chipped without stalling the tractor. The quality spherical roller bearings enable the chipper to be used at any PTO speed, up to 2000 RPM. Safety Features The Valby chippers do not have any knife motion toward the operator. This reduces the risk of material flying back through the feed chute. The discharge height is 82" above ground so the discharge is above eye level. To accomplish safe operation in various wind directions, the Valby chipper's discharge direction is adjustable 360 degrees. The chipper feeds the material smoothly and does not jerk it from the operator's hands. The knives are also counter sunk into the disk for safety. All VALBY chippers also have a locking mechanism to lock the chipping disk during service and maintenance. Powerful Chip Discharge A heavy duty belt drive transmission allows for quick and productive chipping and is a standard feature on both VALBY LC400 and LC600 models. The transmission is geared 2.1:1. For every one revolution of your tractor pto, the chipping disk spins 2.2 times. This process mininizes plugging in the discharge chute and allows for a more uniform chip. The chips can be directed in any desired direction as the discharge chute rotates 360 degrees. The chips can be placed near or far by aiming the deflector bonnet. Ease of Service The upper housing of the chippers opens up for easy access to the knives. The knives can be sharpened about 50 times before replacement. The changing of the knives takes only 10 minutes. The knives are easy to get to and no special tools are needed for the change. The discharge chute is easy to remove so the chipper can be stored inside low buildings. Interchangeable Feed Chutes The feed chutes of the chipper are on a hinge, so the chute can be folded to the side for access to the anvil and knives. The feed chutes are detachable. One can hook up either feed chute option to an existing machine. The F150 is a regular drop feed where the knives pull in the material. The HF 600 has a hydraulic power feed roller which feeds in the material. Hydraulic Power Feed Option The VALBY LC600 can be ordered or retrofitted with a hydraulic power feed. The power feed is useful when whole trees with branches are chipped. The hydraulic feed is controlled from a control bar which runs on top of the feed chute. The operator can select feed, stop and reverse from the control bar. The power feed has one large 10 1/8" diameter top feed roller. The feed roller climbs on top of the material, and the teeth bite into the material and feed it in.
Power Feed in work position
Chipper Videos To view videos of our VALBY Chippers please visit our Youtube channel at www.youtube.com/northeastimplement | |||||||||||||||||||||||||||||||||||||||||
|
Send mail to info@northeastimplement.com with questions regarding our products, or call (607) 589-6160. Including your name and address will help us to locate a dealer near you. Fax: (607) 589-4026. Mail: 460 Halsey Valley Road, Spencer N.Y. 14883. |
