Telephone: (607) 589-6160                     Fax:   (607) 589-4026                     Email:   valby@baka.com

                                                   Farmi Skidding Winches                

Tractor Mounted Valby Wood Chipper

Knuckleboom Log Loader

Electric Motor or Engine Driven Wood Chippers

Valby Traction Tire Chains

Log Grapple, Rotator for pulp and Log Loaders

Skidding Grapple for Farm Tractors

Log Grapple for Skidsteer Loaders

Forwarding Trailers

PTO Shafts

Valby Skid Steer Mounted Wood Chipper

Homepage.

Valby STG36 Stone Grapple

The Valby STG36 is a Grapple used for applications in which a tip-to-tip pinching function is needed, rather than a bypass function.  The maximum opening of the STG36 is 36".

• Weldox 700 is a prime steel used in the manufacture of high quality log grapples.
• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
• Large, powerful cylinder.
• Double connection rods provide good balance and less stress.
• Modern bypass grapple design

Above: The STG36 in a closed position, with the jaws together.

Above: the mounting plate for the STG36.    A R45 rotator can be used for in conjunction with this grapple.

Above (two photos).  The STG36 has grease fittings at each joint.

The jaw material is thick (meter reads .6 inches).

Send mail to valby@baka.com with questions regarding our products, or call (607) 589-6160.  Including your name and address will help us to locate a dealer  near you.

Fax: (607) 589-4026.  Mail: P.O. Box 15, Spencer, N.Y. 14883.