new banner.jpg (9737 bytes)

Telephone: (607) 589-6160                     Fax:   (607) 589-4026                     Email:   valby@baka.com

                                                   Farmi Skidding Winches                

Tractor Mounted Valby Wood Chipper

Knuckleboom Log Loader

Electric Motor or Engine Driven Wood Chippers

Valby Traction Tire Chains

Log Grapple, Rotator for pulp and Log Loaders

Skidding Grapple for Farm Tractors

Log Grapple for Skidsteer Loaders

Forwarding Trailers

PTO Shafts

Valby Skid Steer Mounted Wood Chipper

Homepage.

 

Stone Grab SG52HD

wpe11.jpg (13638 bytes)

This stone grabhas a two prong jaw on one side, and a single jaw on the other.  The jaws and the wear parts are made out of Hardox steel.   

Besides lifting stones, this grapple can also be used for the handling of logs.  The form of the jaws is such that the grab also penetrates into piles of brush or logging slash.

Technical Data:

Max. Grapple Opening 52"
Min. Grapple Opening 3 ½"
Weight: 265 lbs.
Height Closed: 20"
Height Open: 25"
Width of Grapple: 14"
Max. Lifting Capacity 3960 lbs.
Recommended Rotator R45
Working Pressure: 2900 psi

The grapple opens to 52".  To hold anything securely in the grapple, it must close at least 10".  Besides stones, one can handle logs, brush and logging residue with these grapples.

  • Quality grapples have jaws that are made of Hardox steel, and have wear plates.
  • Every joint in a Valby grapple has a grease fitting and a bronze bushing.
  • The Valby grapples have powerful cylinders with heavy pistons.
  • Twin connection rods provide good balance and less stress.
  • A belly plate protects the cylinder from below.
  • The Valby grapples are of modern bypass grapple design that support the log from underneath and both sides.
  • The jaws close to a tight minimum opening.
  • The SG52HD has a sturdy mounting plate.  We recommend the R45 rotator, but the grapple can also be used with the R6 or R30 rotators.
  • The Grapple is a bypass design, which enables controlled release of the load.
  • The Grapple has a cylinder piston that is 1.96" in diameter.

wpe12.jpg (15516 bytes)

Send mail to valby@baka.com with questions regarding our products, or call (607) 589-6160.  Including your name and address will help us to locate a dealer  near you.

Fax: (607) 589-4026.  Mail: P.O. Box 15, Spencer, N.Y. 14883.