new banner.jpg (9737 bytes)

Telephone: (607) 589-6160                     Fax:   (607) 589-4026                     Email:   info@northeastimplement.com

                                                   

Northeast Implement Corporate Home Page

VALBY Wood Chipper

VALBY DOT Forestry Trailers

VALBY Traction Tire Chains

VALBY Log, Sorting and Demolition Grapples

VALBY Tractor Grapples

VALBY Log Grapple for Skidsteer

VALBY Skid Steer Wood Chipper

Forwarding Trailers & Loaders

FARMI Bio-Fuel Chippers

FARMI Forestry Winches

Electric Motor or Engine Driven Wood Chippers

PTO Shafts

Homepage

 

 

Valby GR-60

GR60wrotator1.jpg (19811 bytes)

The GR-60 Grapple is a good choice for medium truck cranes.  This grapple closes down to 3 ½ inches.

 

Valby GR-60
Max. gripping width 60 ½"
Min. opening 3 ½"
Max. lifting capacity 6600 lb.
Height. open 38 3/8"
Height. closed 21"
Width of wider claw 15 "
Working pressure 3625 psi
Jaw material Hardox
Weight 400 lb.
Recommended Rotator: R 6 or R12
  • Hardox is a prime steel used in the manufacture of high quality log grapples.
  • All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
  • Large, powerful cylinders.
  • Double connection rods provide good balance and less stress.
  • A belly plate protects the cylinder from underneath.
  • Modern bypass grapple design
  • The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.

 

grr60nrag1.jpg (10884 bytes)

 

wpe4A.jpg (36381 bytes)

Every joint has a bronze bearing with a grease fitting.

 

Send mail to info@northeastimplement.com with questions regarding our products, or call (607) 589-6160.  Including your name and address will help us to locate a dealer  near you.

Fax: (607) 589-4026.  Mail: 460 Halsey Valley Road, Spencer N.Y. 14883.