GR-36 + R 30

The GR-36 Grapple is a small grapple for farm tractor forwarders and 3-point hitch knuckleboom loaders.  The grapple is shown here with the R-30 rotator.  This is a popular combination when small backhoes are converted to loaders.

• Modern bypass grapple design.
• Raex 640 is a prime steel used in the manufacture of high quality log grapples.
• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
• Large, powerful cylinder.
• Double connection rods provide good balance and less stress.
• A belly plate protects the cylinder from underneath.
• Modern bypass grapple design
• The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.

All Valby grapples have easily accessible grease fittings.  Every joint has a bronze bushing, and there is a grease fitting for every joint.